While some growers prefer to dry trim their cannabis, wet trimming has a number of benefits. Check out this guide to learn how to wet trim your cannabis like a pro!
Checkout this video:
Wet trimming is a method of trimming cannabis that is often used by professional growers. The main benefit of wet trimming is that it allows for a more precise trim, which can result in better-looking buds. Wet trimming also has the benefit of preventing trichomes (the tiny resin glands that contain THC) from being lost during the trimming process.
To wet trim your cannabis, you will need a few supplies:
-A sharp pair of scissors
-A work surface (a cutting board or tray works well)
-A bowl or container to catch the trimmings
-Cannabis buds that are ready to be trimmed
When wet trimming, it is important to handle the buds as little as possible to avoid damage. Start by snipping off any large fan leaves. Next, cut away any small leaves that are sticking out from the main bud structure. Once you have removed all of the leaves, you will be left with bare buds that are ready for drying and curing.
The Wet Trimming Process
Wet trimming is the process of trimming your cannabis while the buds are still wet. This can be done after the bud has been harvested, or even while it is still growing. Wet trimming has a few benefits over dry trimming, such as a cleaner trim and less wasted bud.
Step One: Harvest Your Plants
After weeks or even months of hard work, your cannabis plants are finally ready to harvest. Wet trimming your plants is the best way to ensure that you get the most out of your crop. Here’s a step-by-step guide to wet trimming your cannabis.
Step One: Harvest Your Plants
The first step in wet trimming your cannabis is to harvest your plants. Cut down each plant at the stem, being careful not to damage the buds. If you’re growing multiple plants, it’s best to harvest them one at a time so that you can give each plant the attention it deserves.
Step Two: Remove the Leaves
Once you’ve harvested your plants, it’s time to remove the leaves. Start by trimming off any large fan leaves which can be used for making hash or edibles. Then, begin trimming off the smaller sugar leaves which surround the buds. It’s important to be careful not to damage the buds during this process.
Step Three: Hang the Plants
Once all of the leaves have been removed from your plants, it’s time to hang them upside down in a cool, dark place with good airflow. This will allow the excess moisture to evaporate from the buds and prevent them from molding.
Step Four: Check on Your Plants Daily
During this hanging and drying period, it’s important to check on your plants daily and make sure that they are not too wet or too dry. The ideal moisture content for cannabis buds is between 10-15%. If your buds are too dry, they will crumble and if they are too wet, they will mold.
Step Five: Cure Your Buds (Optional)
Once your buds have reached the desired moisture content, they are ready to be cured. Curing is an optional step but it helps to improve the taste and smell of your weed and make it smoother smoking. To cure your buds, simply store them in airtight jars in a cool, dark place for 2-4 weeks. Be sure to check on them weekly and open up the jars for a few minutes each day to allow fresh air in.
Step Two: Remove the Large Fan Leaves
Once you’ve cut down the main stem of your plant, it’s time to start removing the large fan leaves. These are the leaves that are generally 6 inches or larger in size, and they have a wide surface area. You don’t want to waste your time trying to trim these by hand, so we recommend using a set of leaf trimmers.
Leaf trimmers look like a set of small, sharp scissors, and they make quick work of removing fan leaves. To use them, simply insert the blades into the center of the leaf and snip it off at the base. You can then dispose of the leaf in your trimming bin.
Step Three: Trim the Smaller Leaves
Now that the large fan leaves have been removed, it’s time to focus on the smaller leaves that remain on the plant. These Leaves are called “sugar leaves” because they tend to be covered in trichomes, which contain most of the plant’s THC.
To trim these leaves, you will need a sharp pair of scissors and a designated “trimming tray.” This tray should be large enough to fit all of your trimming materials, including your scissors, cannabis, and any tools you might need like tweezers or a leaf blower.
Once you have your materials gathered, you can begin trimming the sugar leaves off of the buds. Start by cutting off any leaves that are brown or discolored, as these will not be able to produce much THC. Then, begin cutting around the base of each bud, being sure to catch as many small leaves as possible. As you trim, try to keep the buds as intact as possible so that they can be easily manicured later on.
Once all of the sugar leaves have been removed, you can move on to manicuring the bud itself. This process involves removing any remaining small leaves or stems from the bud so that it is ready for consumption.
Step Four: Hang the Plants to Dry
After you have manicured your plants, it is time to hang them to dry. Hanging your plants upside down by their stems is the best way to dry cannabis, as it allows air to circulate around all of the buds and speeds up the drying process. You will need to find a dark, cool, and dry place to hang your plants. Once you have found a suitable location, cut a length of twine or string that is long enough to reach from the ceiling orhighest point in the room to the floor, with plenty of extra length to spare. Tie one end of the string around the stem of each plant and then carefully lift the plant up so that it is hanging upside down fromthe ceiling or highest point in the room. If you are hanging multiple plants, make sure that they are spaced out enough so that they are not touching one another.
Once all of your plants are hung upside down, leave them in this position for 3-7 days until the buds are dry to the touch. You can check on your plants every day to see how they are progressing, but try not to handle them too much as this can disturb the drying process. Once your plants are completely dry, you can remove them from their hangers and begin trimming them.
The Benefits of Wet Trimming
Wet trimming your cannabis is a great way to preserve the quality of your buds. Wet trimming helps to prevent the formation of mold and mildew, and it also helps to keep your buds from drying out and becoming brittle. Wet trimming also allows you to control the shape of your buds, and it can help you to achieve a more consistent trim.
Wet Trimming Preserves More Cannabinoids
Wet trimming your cannabis is key to maintaining the plant’s integrity and preventing it from drying out and losing its potency. When you wet trim, you are essentially giving the plant a chance to “cure” in its own juices, which prevents the loss of terpenes and cannabinoids. Wet trimming also allows for a more even distribution of these compounds throughout the final product.
There are a few different ways to wet trim your cannabis, but the most common method is to simply cut off the fan leaves and trim the buds while they are still wet with dew or water. You can also place your trimmed buds in a container of water for a few hours to help them retain their moisture.
Wet trimming is often done in conjunction with other methods of preserving cannabinoids, such as freezing or vacuum-sealing the buds. However, it is important to note that wet trimming alone will not prevent all cannabinoid loss. For example, if you are storing your cannabis in a humid environment, you may still experience some THC degradation over time.
Wet Trimming Results in a Cleaner Smoke
Wet trimming cannabis is the process of trimming away the leaves of the plant while the buds are still wet. Wet trimming has a number of benefits over dry trimming, chief among them being that it results in a cleaner smoke. Wet trimming also allows for a more precise trim, which can be helpful if you’re trying to remove certain leaves without damaging the buds.
There are a few things to keep in mind when wet trimming your cannabis. First, make sure you have a clean, sharp pair of scissors or trimmers. Second, be patient and take your time: wet buds are more delicate than dry ones and can be easily damaged if you’re not careful. Finally, remember that wet trimming will result in less yield overall, so be prepared to lose some weight.
Wet Trimming Reduces the Risk of Mold and Mildew
Wet trimming your cannabis buds is the process of trimming them while they are still wet from the drying process. Wet trimming has a number of benefits over dry trimming, the most significant of which is that it reduces the risk of mold and mildew. By trimming your buds while they are still wet, you are essentially sealing in all of the moisture that can cause mold and mildew to grow. Wet trimming also allows for a more even trim, as the wetter buds tend to stick together more than dry buds.
There are a few things to keep in mind when wet trimming your cannabis buds. First, it is important to make sure that your scissors or knife are very sharp. Cannabis buds can be tough to cut through when they are wet, so you will need a sharp blade in order to get a clean cut. Second, you will need to work quickly and efficiently in order to avoid damaging the delicate trichomes on the surface of the bud. And finally, you will need to be careful not to overtrim your buds, as this can result in a loss of valuable weight.
Wet trimming is not right for everyone, but if you are looking for a way to reduce the risk of mold and mildew on your cannabis buds, then it is definitely worth considering.
Cannabis trimming is an important process that helps to remove excess leaves and stems from the plant material. Trimming can be done by hand or with the help of a machine, but wet trimming is generally considered to be the best method.
Wet trimming your cannabis can be a bit of a messy process, but it’s definitely worth it in the end. By taking the time to wet trim your plants, you’ll end up with a much higher quality product that is easier to work with.